Milltronics PL-551 Informações Técnicas descarregar pdf (Página 258)

100

101

SECTION FOUR - PREPARATORY FUNCTIONS (G CODES)

Programming with Cutter Compensation

When programming with cutter radius compensation, the first and last move the cutter makes

should be done off the part per the figure below. The movement made prior to cutting should be

at least the distance of the cutter diameter being used.

Block #

Block Entry Info

N1001 G0 X-1 Y-1

N1002 G41 X0 D1 (D offset = tool radius)

N1003 G1 Y3 F10

N1004 X3.5

N1005 G3 R.5 XC4 YC3 X4.5 Y3

N1006 G1 X6.8

N1007 Y2

N1008 X4.5 Y0

N1009 X-1

N1010 G40 Y-.5

No-movement (G65)

The G65 is used for starting and ending cutter compensation. The G65 code placed on a line with

coordinates will cause these coordinates to be used for cutter compensation points but skipped

during machine movement.

G65 X___ Y___ Z___ The machine will not move to the XYZ coordinates.

Note: G65 can use polar move as well as Cartesian coordinates.

G65 R____ AB____

244

1 2 ... 253 254 255 256 257 258 259 260 261 262 263 ... 440 441

Comentários a estes Manuais

Sem comentários

Milltronics PL-551 Informações Técnicas Página 258

Comentários a estes Manuais

Manuais e produtos relacionados com não Milltronics PL-551